AQUAS Indulge Touch Flex Smart 9.5KW Chrome Electric Shower

Description

AQUAS Indulge Touch Flex Smart 9.5KW Chrome Electric Shower – A000392

Enjoy state of the art showering with the AQUAS Indulge Touch Flex Smart Chrome Shower. This 9.5kw electric shower uses digital touchscreen technology to give you total control over temperature and pressure so you can easily select your preferred settings. It’s fully waterproof for long term reliability and is illuminated for clear operation and readability even in dim light. You can decide to use the overhead shower and handset separately or simultaneously thanks to the three way diverter. This AQUAS shower even helps you to reduce your environmental impact with a lower power setting appropriate for warmer seasons.

Product Details:

• Range: INDULGE Touch Flex
• Name: Indulge Touch Flex Smart
• Colour: Black Face / Chrome Body
• Includes Handshower, overhead shower and slidebar
• Distance rail bracket adjustable
• Smooth silver hose 1,5m 1/2″ x  1/2″ twistfree non conductive
• Shower arm 400mm with free fixation
• Spray force – increased spray force for sensational showering experience 
• Zero hole – fullcover spray pattern
• Power Rating: 9.5kw
• A Min Dynamic flow pressure of 100 K /Pa ( 15 ib / Sq In ) – 1.0 BAR  is required
• A Max Static  pressure of 500 K /Pa ( 75 ib / Sq In ) – 5.0 BAR  should not be exceeded
• Advantages:
• Fiber reinforced  Tank – less limescale, extended life, energy efficient, burst resistant
• Controls:
• Start/Stop button
• Easy Grip – temperature control
• Three-way ceramic divertor to switch between Overhead and Handshower
• Shower Fittings:
• Integrated rail in electric shower 600mm with free fixation and front load slider
• Distance between rail brackets adjustable
• all chrome unless otherwise indicated
• Ceramic diverter
• Overhead shower 200mm with air technology
• Showerarm 300mm
• Handshower 100mm diameter, 3 spray pattern: rain, massage, mix air technology
• Rub clean nozzles
• Installation:
• Electrical connection
• Water entry points right – top, bottom, back
• All indulge and AQUAMAX models have a water connection that is suitable for a “right” only water supply connection.
• The water connection pipe is not reversible.
• Use standard UK plumbing connections – compression – Push fit.
• Cable entry points left hand side – top, bottom, back : right hand side – top, bottom, back
• Outlet connection 1/2″ compression and pushfit 1/2″
• Power Input: 
• A Power Input of 240 V and 40 amp circuit breaker is required for max output ( 9.5 KW ) anything less and the heater will not operate at max efficiency
• Approvals: BEAB, CE; ROHS
• Safety:
• Thermal protection: Overheating indication if temperature exceeds 47°C –  automatic reduction of power mode
• Low pressure sensor – automatic reduction of power .  
• If flow drops immediately – shower will reduce power mode to lower level
• Outlet temperature sensor reports back to CPU temperature and would reduce power mode
• Cold start technology – when closing the shower, the temperature display will countdown 6 seconds to final closure of the water. Cold water keeps running during this period to cool down heating coil and prevent scalding in case of an immediate restart
• ELECTRICITY LEAKAGE – SAFETY FEATURE 
• If the event of any electrical leakage above 15 M/ Amps , the heater will automatically close down for maximum safety

Frequently Asked Questions

https://aquasshower.co.uk/en/customer-care/question-and-answers

Additional images are for illustration purposes only

Warranty: 2 years

Gravity Fed Systems:
The AQUAS shower requires a minimum static water pressure of 1.0 bar, delivering a flow rate of at least 9 litres per minute for proper functionality. For optimal performance and a superior showering experience, a pressure of 1.5 bars or higher is recommended.

If installing the shower with a gravity-fed water tank system (commonly located in lofts), it must be paired with a negative or universal head shower pump for sufficient pressure. However, this setup is not recommended, as the AQUAS shower is designed to have its own independent water feed directly from the mains supply.